Minicom Advanced Systems 5UM70166 - Manual (Page 15)

USER GUIDE
14
Install switch definition file
Where the KVM switch type is not listed in the manufacturer/model drop-down
lists, contact Minicom to request an updated Switch Definition file with the
desired KVM switch listed.
1. Load the file onto the Client computer.
2. Locate and install the KVM switch definition file. The switch definition file is
updated.
17. Administration > Serial Settings
Where you have a Serial device connected to the system you must configure the
RS232 settings.
To do so:
From the menu click Serial Settings, the Serial Settings appear, see Figure 9.
Figure 9 Serial Settings
Type a device name and choose the correct device parameters.
17.1 Show
Tick Show to make the Serial device appear in the list of servers/devices that can
be accessed.