Marantz DLPTM VP-12S3/VP-12S3L - Manual (Page 24)

ENGLISH
18
Press the POWER ON button on the remote controller or the POWER button on the projector.
The POWER ON indicator lights up.
Switch to the equipment connected to the projector.
Pressing the
INPUT button on the projector or remote control rotates the input signal in the order of COMPONENT1 ➔ COMPONENT2
➔ S-VIDEO ➔ VIDEO ➔ RGB ➔ AUX, allowing you to select an input signal. An input signal can also be directly selected by pressing
one of the COMP.1 , COMP.2 , S-VIDEO , VIDEO , RGB and AUX buttons on the remote control.
You can select 4 kinds of ASPECT mode using remote controller.
Pressing the
ASPECT button on the remote control rotates the aspect ratio in the order of FULL ➔ NORMAL ➔ ZOOM ➔
THROUGH, allowing you to select an aspect ratio. An aspect ratio can also be directly selected by pressing one of the FULL ,
NORMAL , ZOOM and THROUGH buttons on the remote control, or it can be selected from the menu. (
☞
P.27)
COMP.1
INPUT ASPECT
COMP.2
S-VIDEO
VIDEO
RGB
INPUT1
THEATER
STD
DYNA.
USER
CINEMA
MODE
FULL
NORMAL
ZOOM
THROUGH
INFO
ASPECT
Select a key
Selecting the Aspect Mode
COMP.1
INPUT ASPECT
COMP.2
S-VIDEO
VIDEO
RGB
AUX
INPUT1
THEATER
STD
DYNA.
USER
CINEMA
MODE
FULL
NORMAL
ZOOM
THROUGH
INFO
ASPECT
Select a key
Selecting the Input Signal Source
PATT.
MENU V-MUTE
ENTER
PATTERN
STANDBY POWER ON
Turning on the Power
BASIC OPERATIONS