Marantz DLPTM VP-12S3/VP-12S3L - Manual (Page 32)

❖
Sub Control
Contrast Red
: This menu allows the users to set the contrast for red.
Contrast Green
: This menu allows the users to set the contrast for green.
Contrast Blue
: This menu allows the users to set the contrast for blue.
Brightness Red
: This menu allows the users to set the brightness for red.
Brightness Green
: This menu allows the users to set the brightness for green.
Brightness Blue
: This menu allows the users to set the brightness for blue.
Clamp Position
: Adjusts the clamp position used in RGB input.
Clamp Width
: Adjusts the clamp width used in RGB input.
❖
Miscellaneous
DCDi
: This menu allows the users to control DCDi.
FRC (Frame Rate Conversion)
Auto : Frame Rate Conversion function is basically off. However FRC turns on automatically depending on vertical
frequency of input signal.
ON : Frame Rate Conversion function is “ON”. (60Hz fixed)
CCS (Cross Color Suppressor Function)
ON : Cross color suppressor enabled.
OFF : Cross color suppressor disabled. For like progressive scan DVD players, where most of the source material does
not contain any cross color, use this mode.
Sharpness Filter
: Adjusts the sharpness of DVI and RGB images.
Luminance
Chrominance
Sub Control
Miscellaneous
DCDi
FRC
CCS
Sharpness Filter
On
Auto
Off
2
FineMenu User A1
Luminance
Chrominance
Sub Control
Miscellaneous
Contrast Red
Contrast Green
Contrast Blue
Brightness Red
Brightness Green
Brightness Blue
0
0
0
0
0
0
Clamp Position
Clamp Width
0
0
FineMenu User A1 ENGLISH
26
Item
Contrast Red
Contrast Green
Contrast Blue
Brightness Red
Brightness Green
Brightness Blue
Clamp Position
Clamp Width
Adjustments
0 255
0 255
0 255
0 255
0 255
0 255
-128 127
-128 127
Item
DCDi
FRC
CCS
Sharpness Filter
Adjustments
On Off
Auto On
On Off
0 4