Marantz DLPTM VP-12S3/VP-12S3L - Manual (Page 27)

ENGLISH
21
1. Press the STANDBY button on the remote controller or the POWER button on the projector.
2. The fan continues running for about 1 minute to internally cool the projector. In the meantime, the POWER ON indicator on
the projector flashes a blue color and buttons on the projector and remote control are irresponsive to touch. Once the fan
stops, the POWER ON indicator goes out and the STANDBY indicator lights up a red color to indicate the projector is on
standby.
Notice : Do not pull out the AC power cord until the projector turns in standby mode.
Notice :
- Do not pull out the power cord suddenly in the state of “POWER ON." It can cause a breakdown.
- When a WARNING indicator lit up or blinks in red, pull out the AC power cord after checking that the fan has stopped.
- The projector will not be turned on if the
POWER ON button on the remote controller or the POWER button on the projector is
pressed immediately after turning off. Press the POWER ON button on the remote controller or POWER button on the
projector after the projector turns into standby mode.
- When on standby, power to the projector is not OFF completely. If not planning to use the projector for an extended period of
time, unplug the AC power cord from AC power outlet as explained above.
PATT.
MENU V-MUTE
ENTER
PATTERN
STANDBY POWER ON
To Turn off the Power