Contrast, Color temp. (temperature), Setting the picture adjust menu – Marantz DLPTM VP-12S3/VP-12S3L User Manual
Page 30: Picture adjust, English
Picture quality in each of the picture modes can be adjusted to your liking and those adjustments can be saved in memory.
This projector makes 3 memory indexes available for each of the picture modes.
❖
For a video signal input, the following adjustments can be made:
NOTE:
- You cannot adjust Tint in Component signal (YC
B
C
R
/YP
B
P
R
)
or PAL format signal.
- When the index is set to default, picture quality cannot be
selected. To adjust picture quality, set the index to 1 - 3.
See “Preset”. (
☞
P.32)
❖
Contrast
❖
Color Temp. (Temperature)
1 :
Red comes out strong. Color temperature is about 5250 K.
2 :
Red is mildly strong. Color temperature is about 5800 K.
3 :
Normal. Color temperature is about 6500 K.
4 :
Blue is mildly strong. Color temperature is about 7500 K.
5 :
Blue comes out strong. Color temperature is about 9300 K.
❖
Setting the Picture Adjust Menu
1.
Select the desired menu item and press the
2
button.
An adjustment bar appears on the screen.
2.
Press the
1
and
2
buttons to adjust picture quality.
3.
Press the
3
button to enter the adjustment and return to menu item selection.
INPUT
ASPECT
MENU
V-MUTE
ENTER
3.
1, 2
3.
1, 2
Color Temp.
2
Contrast
50
Picture Adjust
ENGLISH
24
Item
Contrast
Brightness
Color
Sharpness
Tint
Noise Reduction
Color Temp. (Color Temperature)
Adjustments
0
100
Weak
Strong
0
63
Dark
Bright
0
100
Light
Deep
0
31
Soft
Sharp
R50
G50
Purple
Green
0
63
Weak
Strong
1
2
3
4
5
Red
Blue