Motorola MEA 3.1 User Manual
Page 14
Advertising
2. Obtain the transceiver MAC address and the ETH address that was recorded earlier in
section
. The address will be in the format 00-05-12-0A-xx-yy for the transceiver and
00-05-12-30-xx-yy for ETH.
3. From the MeshManager software screen, display the devices using the MAC address.
Note: This step assumes that the MeshManager software has been installed and running on
a networked computer.
4. Within the MeshManager software screen, select the appropriate VMM in the device tree.
5. Right-click on the device MAC address and select the Ping option.
A successful response to the Ping command verifies that the VMM is communicating to the
infrastructure devices.
6
Advertising