Viewing the vmm configuration tab as a normal user – Motorola MEA 3.1 User Manual
Page 21
Mesh Enabled Access
Vehicle Mounted Modem Users Guide
VMM Device Administration Page Fields (Administrator / Super User Login)
Field Name
Field Description
Field Default Value
System Name
This is the name of the device as shown by
MeshManager
Assigned by
Network
Administrator
RDATE Server IP
Address
The IP address of the RDATE server. This is
usually the MiSC when operating in
infrastructure mode. The RDATE server
provides the current date to the VMM. The
VMM can operate without an RDATE server.
172.31.0.20
Wired Interface
Address
The VMM will tell the attached Ethernet devices
to use this address for the default gateway, and
the VMM will use the address when accessing
the local Ethernet segment.
MAC-derived
Wired Interface
Subnet Mask
This is the subnet mask for the local Ethernet
segment.
255.255.0.0
DHCP Lease Time
This is the duration (in seconds) of the DHCP
leases that the VMM offers to the attached
Ethernet devices.
300
Device Priority
The Device Priority provisioning area allows the
operator to set the priority assigned to wireless
messages transmitted by this device. A priority
of 7 is the highest priority setting.
Levels 0-7 are
available, based on
your configuration as
set by the Network
Administrator
Geo Settings
The Geo Settings area allows the operator to
enable and disable the Geo Reporting feature
(if provisioned), as well as control the
frequency of reports and provision the
destination server to which those Geo reports
will be sent. Requires entry of the primary Map
server’s IP address. The secondary Map
address is optional.
Reporting Interval is
set to 10 seconds.
The External Device Provisioning frame of this web page is described in
3.2.5.2
Viewing the VMM Configuration Tab as a Normal User
A similar screen will be displayed for the Access account (the web page will indicate Normal
User Login). Normal users can change only those settings for which they have system
privileges.
13