Motorola MEA 3.1 - Manual (Page 22)

Figure 3-6. VMM Configuration Page (Normal User Account)
3.2.6 VMM Device Administration Geo Position Tab
The geo position feature has to be provisioned on the destination or map server by the Network
Administrator.
Before any data can be viewed on the Geo Position tab:
1. The Enable Geo Position check box has to be checked on the Configuration tab, in the
Geo Settings section of the screen.
2. The map server’s IP address needs to be provided in the Primary Map Address field in
the Geo Settings section. The Secondary Map Address is optional.
For additional information about the Geo Location feature, refer to the MeshPositioning
Application Users Guide.
14