Motorola MEA 3.1 - Manual (Page 29)

Mesh Enabled Access Vehicle Mounted Modem Users Guide
3.6.1 MeshTray Status Information
When the utility is launched, the MeshTray Status tab displays useful system information such
as a Description of the device, the MAC and IP address of the device, and the Type of device
(i.e., Vehicle Mounted Modem, Subscriber Device, etc.). The Firmware Version and Firmware
Build Date displayed here can be used to verify that the correct firmware revision is currently
loaded on the device, particularly after a firmware upgrade. The associated IAP MAC address
and the IAP Link Quality are also displayed.
Note: Viewing the Configuration tab in MeshTray from a laptop that is connected directly to a
VMM’s Ethernet port, will show the “Addressing Scheme” section as grayed-out, or not
available.
Figure 3-11. MeshTray Status Tab (VMM)
21