Maytag MAH7550AGW - Manual (Page 14)

13
U
SING
H
ELP CONT
.
Touch the Help touchpad. Touch the “Select Preferences”
area.
Touch “Loud”, “Medium”, “Soft” or
“Off ” to set the volume level of the
touchscreen beeps. Touch “Continue”
to accept the selected volume setting.
Step 1
stain brain
Help Menu
laundry hints
lock-out
feature
troubleshooting
tips
operating tips
select
preferences
This provides audible feedback upon
making selections on the touch screen.
loud
soft
Touch Screen Volume
continue
off
medium
Depending on the lighting in your home and
other factors, you may want to adjust the
contrast of your touchscreen. Touch the
arrows to lighten or darken the display.
Touch “Continue” when finished.
Use the arrow keys to adjust
the contrast of the viewing screen.
default continue
You have the ability to change the language
between English, French, Spanish and
German.
You will always see the next
screen in the selected language to make
sure you want to change the language.
Are you sure you would like to change the
language to French?
English to French
De l'anglais au français
yes/oui no/non
Souhaitez-vous vraiment sélectionner
le français?
C HANGE T OUCHSCREEN
V OLUME
C HANGE M ONITOR C ONTRAST C
HANGE
L
ANGUAGE
D
ISABLE
F
ILL
H
OSES
S
WITCHED
M
ESSAGE
Step 2
Select Preferences
change monitor
contrast
touch screen
volume medium
cambiar a
español
change
to English
sélectionner
le français
zu Deutsch
überwechseln
disenable "fill hoses
switched" message
Verify that inlet hoses are properly connected.
If "algorithm off" is chosen, the washer will
not detect reversed inlet hoses. Once chosen
it remains off until "algorithm on" is selected.
Hose Reversal Detection
algorithm
on
algorithm
off
If the washer detects that the hot and cold inlet hose
connections have been reversed, the machine will display a
message stating such. If you have checked the hoses and
determined that they are correctly connected, you can
turn off the algorithm that detects this condition by
touching “Algorithm Off ”.
S
ELECT
P
REFERENCES
The Select Preferences feature allows you to change the display language from English (default) to French, Spanish or
German, set the contrast of the screen display, select the volume of the touchscreen beeps, and toggle the “fill hoses
switched” message on or off.
Here you will see the available
topics. Touch the topics to see
specific information.
Step 3
As you use the touchscreen, if you feel
you are lost, press Back or Home.