I-Data 5250 ALLY - Manual (Page 142)

AGILE 5250 ALLY User’s Guide and Reference Page 5-20
PFS Test (Mode 9-4)
This report will print a test sample of several of the 5250 ALLY PFSs. For
each PFS, see that it has been implemented properly by looking at the
effect on the text that follows the PFS name. For example, to test PFS 12
— P 10CPI, the report will print “This line of text is in 10 CPI,” using the
appropriate font as defined in the PFS.
The following is a sample report:
-----------------------------------------------------------------------------
AGILE 5250 ALLY V1.00 COPYRIGHT (C) 09/01/95 BY AGILE. ALL RIGHTS RESERVED.
PFS Test Page
-----------------------------------------------------------------------------
This is a test of the PFSs for the printer. Each of the following print
enhancements are made with the indicated PFS.
P 5CPI>
5 Characters Per Inch.
P 10CPI>
This text should be 10 Characters Per Inch.
P PSCPI>
This text should be proportionally spaced.
WWWWWWWWWW
iiiiiiiiii
P 12CPI>
This should be 12 Characters Per Inch.
P 15CPI>
This should be 15 Characters Per Inch.
P 16CPI>
This should be 16 Characters Per Inch.
Now Back to 10 CPI.
BOLD ON>
This text should be bold.
BOLDOFF>
This text should not be bold.
UNDL ON>
This text should be underlined.
UNDLOFF>
This text should not be underlined.
SUBS ON> Baseline.
Subscripted.
SUBSOFF>
SUPS ON> Baseline. Superscripted. SUPSOFF>
-----------------------------------------------------------------------------