I-Data 5250 ALLY - Manual (Page 161)

Page 5-39 CHAPTER 5 — MAINTENANCE & TROUBLESHOOTING
If an “X” appears on the screen instead of a “0,” an error has occurred in
the code load process. Contact AGILE Technical Support for instructions
if an error appears.
Other Files Contained in the Self-Extracting Archive
Readme.txt is an explanation of how to use the files contained in the
archive. The user may read this file with any program that can read test
files.
Param.exe will print to the screen information about the 5250 ALLY to
which the PC has been connected via the alternate host port. This
information is useful only to AGILE Technical Support, and the user will
ordinarily use this utility only when requested to do so by AGILE. A
sample printout follows:
5250 ALLY parameter print utility 1.0 Copyright (C) 1995 Agile Inc.
Unit parameters:
Sector Size: 80
First sector: 1000
Last sector: 1fff
Boot sector: ffc0
Boot version: 101
Gocode.exe will restart the 5250 ALLY from the alternate host PC after
new code has been loaded, and without the user having to reset the unit
from its front panel.
Boot.agl is boot code for the 5250 ALLY. Warning: Do not attempt to
load this file to the 5250 ALLY except after having been advised to do
so, and after being told how to do so, by AGILE Technical Support.
Loading boot.agl improperly can cause permanent damage to the 5250
ALLY.