IBM GC09-2830-00 - Manual (Page 145)

Appendix A. Basic Task Knowledge
This section describes the basic tasks that you will need to know to use this
product effectively.
Go to the task that you want to perform:
v “Starting the Software Registration Tool”.
v “Starting the Client Configuration Assistant”.
v “Starting the Control Center” on page 134.
v “Entering Commands Using the Command Center” on page 134.
v “Entering Commands Using the Command Line Processor” on page 136.
v “Working with the System Administrative Group” on page 138.
Starting the Software Registration Tool
Start the Software Registration Tool as follows:
OS/2 Click on OS/2 Warp and select DB2 for OS/2–>Registration
Windows 9x or Windows NT
Click on Start and select Programs->DB2 for
Windows->Registration
Starting the Client Configuration Assistant
Start the Client Configuration Assistant (CCA) as follows:
OS/2 Click on OS/2 Warp, and select DB2 for OS/2–>Client
Configuration Assistant
Windows 9x or Windows NT
Click on Start and select Programs->DB2 for
Windows->Client Configuration Assistant
You can also start the CCA by entering the db2cca command at a
command prompt.
© Copyright IBM Corp. 1993, 1999 133