IBM GC09-2830-00 - Manual (Page 84)

window.
To configure IBM eNetwork Personal Server for APPC communications,
complete the perform the following steps:
Step 1. Configure Node
a. In the Configuration options field, select Configure Node, then
click on the New push button. The Define the Node window
appears.
b. In the Fully qualified CP name fields, type in the network name
(
9 ) and the local control point name ( 10 ) (SPIFNET.NYX1).
c. Optionally, in the CP alias field, type in a CP alias. If you leave
this blank the local control point name (
10 ) will be used (NYX1).
d. In the Local Node ID fields, type in the block ID (
13 ) and the
physical unit ID (
14 ) (05D.27509).
e. Select the appropriate node type. The default is to select the End
Node
radio button.
72 Quick Beginnings