IBM GC09-2830-00 - Manual (Page 95)

g. Select the Address tab.
h. Fill in the Remote Network Address field (
8 ). Accept the
default numbers in the other fields.
i. Select the System Identification tab.
j. Enter the following information:
1) For the Local Node Name, add the Network ID (
9 ), the
Local PU Name (
10 ), and the Local Node ID ( 1 plus 14 ).
Accept the XID Type default.
2) For the Remote Node Name, add the NETID (
1 ) and the
Control Point Name (
4 ). Accept the other defaults
k. Click on OK.
Step 5. Define a local LU
a. Right-click on the SNA Service icon and select the
Insert->APPC->Local Lu
option. The Local APPC LU Properties
Chapter 7. Configuring APPC Communications on the DB2 Connect Workstation 83