IBM GC09-2830-00 - Manual (Page 40)

Step 1. Log on to the system with the user ID that you created to perform
the installation.
Step 2. Insert the CD-ROM in the drive.
Step 3. Open an OS/2 command window and set the directory to your
CD-ROM drive by entering the following command:
cd x:
where x: represents your CD-ROM drive.
Step 4. Enter the following command:
x:\install
where x: represents your CD-ROM drive.
To manually invoke the installation program, enter the following
command:
x:\install /i language
where x: represents your CD-ROM drive and language represents the
country code for your language.
Step 5. The Welcome window opens.
Step 6. Respond to the install program’s prompts. Online help is available to
guide you through the remaining steps. Invoke online help by
clicking on the Help push button or the F1 key at any time. You can
click on the Cancel push button at any time to end the installation.
28 Quick Beginnings