IBM 1220 - Manual (Page 101)

99
Setup Required
What this message means:
• When you unpacked the printer, you left a piece of packing material inside.
• A hardware component, such as an optional paper drawer, has not been installed correctly.
What you can do:
• Remove all packing material from inside the printer.
• Correctly install the component.
See also:
Setup Guide
Staples Low
What this message means:
The stapler has only a few staples remaining.
What you can do:
• Press Go to continue printing.
• Install a new staple cartridge to clear the message.
Std Bin Full
What this message means:
The standard bin is full.
What you can do:
Remove the stack of paper in the bin to clear the message.