Load manual, Load <x> plain letter, Load staples – IBM 1220 User Manual
Page 88
86
Load Manual
What this message means:
A request for a manual feed job has been sent to the printer. The printer is ready for insertion
of a single sheet into the manual feed slot.
What you can do:
•
Load a sheet of the paper specified in the second line of the display in the manual feed tray or
multipurpose feeder.
•
Press
Select
or
Go
to ignore the manual feed request and print on paper already installed in
one of the input sources. If the printer finds a tray that has paper of the correct type and size, it
feeds paper from that tray. If the printer cannot find a tray with the correct paper type and size,
it prints on whatever paper is installed in the default input source.
•
Press
Menu
to open the Job Menu and cancel the current job.
See also:
Loading the multipurpose feeder
Load <x>
Plain Letter
What this message means:
Someone has initiated a tray calibration procedure.
What you can do:
•
Load paper into <x> and press Go to continue the calibration process.
See also:
;
Load Staples
What this message means:
The printer is trying to staple a print job, but the stapler is empty.
What you can do:
•
Install a new staple cartridge in the stapler.
•
Press
Go
to clear the message and continue printing without stapling.
•
Press
Menu
to open the Job Menu and cancel the current job.