IBM 1220 - Manual (Page 81)

79
Disabling Menus
What this message means:
The printer is responding to a request to disable the menus.
What you can do:
Wait for the message to clear.
Note: While the menus are disabled, you cannot change the printer settings from the
operator panel.
See also:
Disabling the operator panel menus
Disk Corrupted.
Reformat?
What this message means:
The printer has attempted a disk recovery process and cannot repair the disk.
What you can do:
• Press Go to reformat the disk and delete all files currently stored on the disk.
• Press Stop to clear the message without reformatting the disk. The printer may display Disk
Recovery and attempt to recover the disk.
See also:
Disk Recovery x/5 yyy%
Disk Recovery
x/5 yyy%
What this message means:
The printer is attempting to recover the hard disk. Disk recovery takes place in five phases; the
second line on the operator panel display shows the percent complete of the current phase.
What you can do:
Wait for the message to clear.
W ARNING : Do not turn the printer off while this message is displayed.