Icom IC-V85-T User Manual
Page 19
6
2
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
[6•
SKIP
]
➥ Input digit “6” during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing
[FUNC]
, sets and cancels skip
setting for memory scan during memory mode.
(p. 37)
[7•
PRIO
]
➥ Input digit “7” during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing
[FUNC]
, starts priority watch.
(p. 38)
[8•
SET
]
➥ Input digit “8” during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing
[FUNC]
, enters into
SET MODE
.
(p. 47)
[9•
H/M/L
]
➥ Input digit “9” during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing
[FUNC]
, switches transmit power
between high, middle and low output power.
(p. 19)
When the transceiver becomes hot during
high or middle output power operation, the
built-in protection circuit activates to reduce
the transmit output power to 3 W
(approx.)
.
[0•
OPT
]
➥ Input digit “0” during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing
[FUNC]
, selects an optional func-
tion mode, such as pager or code squelch op-
eration. (pgs. 45, 46)
[#•
BANK
]
After pushing
[FUNC]
, enters a memory bank se-
lection. (p. 30)
[
✱
ENT
•
]
➥ Sets the frequency even if the full 6 digits of
frequency have not been entered. (p. 17)
➥ After pushing
[FUNC]
, switches key lock func-
tion ON and OFF when pushed and held for 1
sec. Lock all keys, except
[PWR]
,
[PTT]
,
[MONI]
and audio level adjustment. (p. 20)
ENT
BANK
0
OPT
9
H/M/L
8
SET
7
PRIO
6
SKIP