Icom IC-V85-T - Manual (Page 63)

50
11
SET MODES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D D Memory bank setting
Sets the desired memory bank (A to J and OFF) to assign the
regular memory channels.
This item appears when
SET MODE is accessed from memory
mode only.
D D Memory bank link function
Sets the memory bank link function ON and OFF (default).
The link function provides continuous banks scan, scanning
all contents in the selected banks during bank scan.
This item appears when
SET MODE is accessed from memory
mode only.
• Bank link setting
q Rotate [VOL] to select the memory bank link function ON.
w Push [ Y Y ] or [ Z Z ] to select the desired bank to be linked.
• bLA: Bank A, bLb: Bank B, bLC: Bank C, bLd: Bank D,
bLE: Bank E, bLF: Bank F, bLG: Bank G, bLH: Bank H,
bLI: Bank I, bLJ: Bank J
e Rotate [VOL] to “ON” to link the bank.
r Repeat steps w and e to link other banks.
D D Weather alert function
Turns weather alert function ON and OFF (default).
USA version only