Icom IC-V85-T - Manual (Page 33)

20
4
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■
Display type
The transceiver has 3 display types to suit your operating
style during memory mode operation. The display type is
selected in
INITIAL SET MODE (p. 53).
“Frequency Indication” type
Displays operating frequency.
“Channel Number Indication” type
Displays memory channel number. In this type only pre-
programmed memory channel numbers are displayed.
VFO mode cannot be selected.
• When the channel indication type is selected, only the following
functions can be performed.
- Scan function (p. 35)
- Output power setting (p. 19)
- DTMF memory function (p. 32)
- Key lock function (see next set of instructions)
- Scan pause timer setting, function key timer setting and LCD
backlight setting in SET MODE (p. 49)
“Channel Name Indication” type
Displays memory channel name you have assigned. In this
display pre-programmed memory channel names are dis-
played.
VFO mode is selectable.
• Programmed frequencies are indicated when you have not pre-
programmed the channel names in the selected memory channel.
• Push and hold [MONI] to display the operating frequency.
■
Key lock function
The key lock function prevents accidental frequency changes
and function activation.
Push [FUNC] then push and hold
[ ] ( ✱
ENT ) for 1 sec. to toggle the
function ON and OFF.
• “ ” appears while the lock function is ac-
tivated.
• [PWR] , [PTT] , [VOL] and [MONI] can be
operated regardless of this setting.
USING
INITIAL SET MODE
DUP SCAN
PRIO SET H/M/L
OPT SKIP
BANK TONE T.SCAN P.BEEP
A B D C
CALL
ENT
MR CLR FUNC
PWR
9 8 7
4
1 2 3
5 6 0
A
FUNC
ENT