Icom IC-V85-T - Manual (Page 42)

29
6
MEMORY/CALL OPERATION
D Memory/call
➾
memory/call
q Select the memory (call) chan-
nel to be transferred:
➥ Push [MR] (or [CALL] ) to se-
lect the memory (call chan-
nel) mode.
➥ Push [ Y Y ] or [ Z Z ] to select the
memory channel.
• When [VOL] is assigned as
tuning dial, rotate [VOL] to se-
lect the memory channel. (pgs.
18, 53)
w Push [FUNC] , then push [MR]
momentarily.
• “--” and “X” blink.
e Push [ Y Y ] or [ Z Z ] to select the target memory.
• When [VOL] is assigned as tuning dial, rotate [VOL] to select
the target channel. (pgs. 18, 53)
r Push [FUNC] , then push and hold [MR] for 1 sec.
• Memory mode is selected and the contents are transferred to the
target memory.
D Clearing a memory
q Push [CLR] to select VFO mode, if necessary.
w Push [FUNC] , then push [MR] to enter the memory trans-
fer mode.
• “X” and a memory channel
number blink.
e Push [ Y Y ] or [ Z Z ] to select the
memory channel to be cleared.
• When [VOL] is assigned as tun-
ing dial, rotate [VOL] to select the
memory channel. (pgs. 18, 53)
• The call channel cannot be
cleared.
r Perform the following operation
within 1 sec, otherwise the
transceiver returns to the mem-
ory mode without clearing the
memory.
- Push
[FUNC] , then push [MR] momentarily.
- Push [FUNC] , then push and hold [MR] for 1 sec.
• The contents of the selected memory are cleared.
t Push [CLR] to return to regular operation.
DUP SCAN
PRIO SET H/M/L
OPT SKIP
BANK TONE T.SCAN P.BEEP
A B D C
CALL
ENT
MR CLR FUNC
PWR
9 8 7
4
1 2 3
5 6 0
[VOL]
A
FUNC
B
CALL
C
MR
DUP SCAN
PRIO SET H/M/L
OPT SKIP
BANK TONE T.SCAN P.BEEP
A B D C
CALL
ENT
MR CLR FUNC
PWR
9 8 7
4
1 2 3
5 6 0
A
FUNC
C
MR