Integra RDV-1.1 - Manual (Page 16)

16
Getting to Know the RDV-1.1
For detailed information, refer to the pages in parenthesis.
A Power switch (43)
This is the main power switch. When set to OFF, the
RDV-1.1 is completely shutdown. When set to ON,
the RDV-1.1 can be set to On or Standby.
B Standby/On button (43)
This button is used to set the RDV-1.1 to On or
Standby.
C On & Standby indicators (43)
The On indicator lights up when the RDV-1.1 is set
to On. The Standby indicator lights up when it’s set
to Standby.
D Display
See “Display” on page 17 for more information.
E Remote control sensor (15)
This sensor receives control signals from the remote
controller.
F Display button (64)
This button is used to display information about the
disc, title, chapter, group, or track, including the
elapsed time, remaining time, total time, and so on.
G Previous [ ] button (49, 53, 50)
This button is used to select the previous chapter or
track. During playback it selects the beginning of
the current chapter or track.
H Next [ ] button (49, 53, 50)
This button is used to select the next chapter or
track.
I Video Circuit Off button & indicator (67)
This button is used to turn off all of the internal
video circuitry, eliminating the possibility of inter-
ference when playing audio-only discs. The Off
indicator lights up when the video circuitry is turned
off.
J Video Input knob (67)
This knob is used to select the video input source:
DVD (the RDV-1.1), External (component video
input, S-Video input, or composite video input), or
HDMI (HDMI input).
K DVD, External & HDMI indicators (67)
These indicators show the currently selected video
input source: DVD, External, or HDMI.
L Disc tray (46)
Discs are loaded onto the disc tray.
M Open/Close button (46)
This button is used to open and close the disc tray.
N Stop button (47)
This button is used to stop playback.
O Play button (47)
This button is used to start playback.
Front Panel
B 1 C D E F G H
L M N O K J I