Integra RDV-1.1 - Manual (Page 20)

20
Getting to Know the RDV-1.1 —Continued
U 12V TRIGGER IN
This socket can be connected to the 12-volt trigger
output on an AV receiver or other component so that
the RDV-1.1 can be turned on remotely.
V AC INLET (42)
The supplied power cord should be connected here.
■ European model
For detailed information, refer to the pages in parenthe-
sis.
A i.LINK S400 (AUDIO) (34)
These sockets can output up to six channels and up
to 192 kHz/24-bit digital audio in i.LINK format
and can be connected to the i.LINK sockets on a
compatible AV receiver or other component. The
actual output signal depends on the disc currently
playing. Since
i.LINK is a bidirectional connec-
tion, connected components can talk to each
other for optimal setup and perfectly synchro-
nized audio transmission.
B RS 232
This bidirectional RS-232 port can be connected to
an external controller.
C HDMI OUT (32)
This HDMI socket outputs digital video and audio
and can be connected to an HDMI input on a com-
patible TV or other component.
When the video input source is set to HDMI, the
signals received by the HDMI IN are output here.
D HDMI IN (32, 40)
This input accepts HDMI digital video and audio
and can be connected to an HDMI output on a com-
patible AV receiver or other component.
When the video input source is set to HDMI, video
signals received here are output by the HDMI OUT.
E VIDEO IN component (Y, P R , P B ) (39)
This input accepts both SD and HD component
video and it can be connected to a component video
output on a TV or other video component.
When an SD component video signal is input, it’s
upconverted to progressive video and output by the
HD VIDEO OUT COMPONENT 1 and 2 outputs.
When an HD component video signal is input, it’s
output by the HD VIDEO OUT COMPONENT 1
output at the same resolution.
F VIDEO IN S VIDEO (39)
This input accepts S-Video and can be connected to
an S-Video output on a satellite/cable tuner or other
component.
When the video input source is set to External,
video signals received here are upconverted to pro-
gressive video and output by the HD VIDEO OUT
COMPONENT 1 and 2 outputs.
G VIDEO IN VIDEO (39)
This input accepts composite video and can be con-
nected to a composite video output on a satellite/
cable tuner or other component.
When the video input source is set to External,
video signals received here are upconverted to pro-
gressive video and output by the HD VIDEO OUT
COMPONENT 1 and 2 outputs.
H VIDEO OUT COMPONENT (Y, P R , P B ) (30)
These sockets output component video and can be
connected to a component video input on a TV or
projector. They output only interlaced video.
I VIDEO OUT S VIDEO (30)
These two sockets output S-Video and can be con-
nected to an S-Video input on a TV or projector.
COAXIAL OPTICAL OPTICAL COAXIAL
DIGITAL 1 DIGITAL 2
DIGITAL 2 ( BALANCED)
AES/EBU
AUDIO OUT
MODEL NO. RDV- 1.1
DVD PLAYER
AC INLET
D. MIX FRONT SURR 1 CENTER SURR 2
L
R
L
R
IN
SUB
WOOFER
1
2
Y P B P R
OUT
OUT
IN
REMOTE
CONTROL
VIDEO OUT
COMPONENT
VIDEO
S VIDEO VIDEO
S VIDEO
Y
P B
P R
Y
P B
P R
IN
1 + 2 1
RS 232 HDMI VIDEO IN IR
S400
( AUDIO)
AUDIO OUT
HD VIDEO OUT
COMPONENT
12V
TRIGGER
SURR MODE
(AUDIO OUT)
AV CONNECTOR
W
P
F
G K M
U V
Q O N E H
I
J 1 BC D L
R S T