Connecting —continued, P. connecting a component with an hdmi output, Connecting components with – Integra RDV-1.1 User Manual
Page 40: Av receiver, etc. signal flow, Integra research av receiver to use, Cable (supplied)
40
Connecting
—Continued
The RDV-1.1 has an HDMI IN socket, so you can con-
nect another HDMI-compatible component, such as an
AV receiver. When the video input source on the
RDV-1.1 is set HDMI (see page 67), signals received by
the HDMI IN are fed through to the HDMI OUT.
Notes:
• The RDV-1.1 supports HDCP (High-bandwidth Digi-
tal Content Protection), a protection system for digital
video. HDMI components that you connect to the
RDV-1.1 must also support HDCP.
• The RDV-1.1 supports High-Definition Multimedia
Interface Specification Information Version 1.0.
With
(Remote Interactive) you can control the
RDV-1.1 by using the remote controller supplied with
your Integra RESEARCH
-compatible AV receiver.
Notes:
• Push the plugs in all the way to make a good connec-
tion.
• Use only
cables for
connections.
•
To use
you must make an analog audio connec-
tion (RCA) between the RDV-1.1 and Integra
RESEARCH AV receiver, even if they are already
connected digitally.
• The RDV-1.1 has two
sockets. You can connect
either one to the Integra RESEARCH AV receiver. The
other socket is for connecting additional
-compat-
ible components.
• Connect the RDV-1.1’s
socket to only Integra
RESEARCH components. Connecting to other manu-
facturer’s components may cause them to malfunc-
tion.
P. Connecting a Component with an
HDMI Output
COAXIAL
OPTICAL
OPTICAL
COAXIAL
DIGITAL
1
DIGITAL
2
DIGITAL 2
( BALANCED)
AES/EBU
AUDIO OUT
D. MIX
FRONT
SURR
1
CENTER
SURR
2
L
R
L
R
IN
SUB
WOOFER
1
2
Y
P
B
P
R
OUT
OUT
IN
REMOTE
CONTROL
VIDEO OUT
COMPONENT
VIDEO
S VIDEO
VIDEO
S VIDEO
Y
P
B
P
R
Y
P
B
P
R
IN
1+ 2
1
RS
232
HDMI
VIDEO IN
IR
S400
( AUDIO)
AUDIO OUT
HD VIDEO OUT
COMPONENT
12
V
TRIGGER
SURR MODE
(AUDIO OUT)
IN
HDMI
HDMI
OUT
AV receiver, etc.
Signal flow
Connecting Components with
COAXIAL
OPTICAL
OPTICAL
COAXIAL
DIGITAL
1
DIGITAL
2
DIGITAL 2
( BALANCED)
AES/EBU
AUDIO OUT
D. MIX
FRONT
SURR
1
CENTER
SURR
2
L
R
L
R
IN
SUB
WOOFER
1
2
Y
P
B
P
R
OUT
OUT
IN
REMOTE
CONTROL
VIDEO OUT
COMPONENT
VIDEO
S VIDEO
VIDEO
S VIDEO
Y
P
B
P
R
Y
P
B
P
R
IN
1+ 2
1
RS
232
HDMI
VIDEO IN
IR
S400
( AUDIO)
AUDIO OUT
HD VIDEO OUT
COMPONENT
12
V
TRIGGER
SURR MODE
(AUDIO OUT)
OPTICAL
DIGITAL IN
OPTICAL
R
L
D. MIX
L
R
AUDIO OUT
AUDIO IN
REMOTE
CONTROL
REMOTE
CONTROL
Integra RESEARCH AV receiver
To use
you must
make an analog audio
connection (RCA)
between the RDV-1.1
and the other compo-
nent even if they are
already connected dig-
itally.
cable
(supplied)