Integra RDV-1.1 - Manual (Page 31)

31
Connecting —Continued
Notes:
• Before making any connections, turn off the RDV-1.1
and your TV and disconnect their power cords from
the wall outlets.
• Also refer to the hookup pages in your TV’s manual.
• Connect the RDV-1.1’s video outputs directly to your
TV. Don’t connect a VCR or other video equipment in
between. Doing so may result in picture distortion,
because of the copy protection system used on
DVD-Video discs.
• See the tables on page 27 for details on how the
RDV-1.1 outputs video and audio from each output.
This section shows how to connect the RDV-1.1 to an
HDTV (plasma, LCD) or projector.
Use a commercially available component video cable
(BNC) to connect the RDV-1.1’s HD VIDEO OUT
COMPONENT 1 or 2 sockets to a component video
input on your HDTV. Use the supplied AV cable (RCA)
to connect the RDV-1.1’s D.MIX AUDIO OUT to an
analog audio input on your HDTV.
Notes:
• The yellow plugs on the supplied AV RCA cable are
not used in this example.
• Don’t connect a standard TV to the HD VIDEO OUT
COMPONENT 1 or 2 socket, because you’ll get no
picture.
• See the tables on page 27 for details on how the
RDV-1.1 outputs video and audio from each output.
1 Turn off the RDV-1.1 and your TV, and dis-
connect their power cords from the wall
outlets.
2 Connect the RDV-1.1 to your TV as shown.
3 When you’ve completed all connections,
see “Turning On the RDV-1.1” on page 43.
D. Connecting an HDTV or Projector
COAXIAL OPTICAL OPTICAL COAXIAL
DIGITAL 1 DIGITAL 2
DIGITAL 2 ( BALANCED)
AES/EBU
AUDIO OUT D. MIX FRONT SURR 1 CENTER SURR 2
L
R
L
R
IN
SUB
WOOFER
1
2
Y P B P R
OUT
OUT
IN
REMOTE CONTROL
VIDEO OUT COMPONENT
VIDEO S VIDEO VIDEO
S VIDEO
Y
P B
P R
Y
P B
P R
IN
1+ 2 1
RS 232 HDMI VIDEO IN IR
S400 ( AUDIO)
AUDIO OUT
HD VIDEO OUT COMPONENT
12 V TRIGGER
SURR MODE (AUDIO OUT)
Y P B P R
Y
1
P B P R
COMPONENT
COMPONENT IN
D. MIX
L
R
AUDIO OUT
L R
ANALOG INPUT
HDTV, projector
Component
video cable (white)
(red)
Signal flow
(white)
(red)
AV RCA cable
(supplied)