IBM 5000 - Manual (Page 138)

Diagnostic Messages
Function: Hard Disk Drive Messages (217)
Result Test Specific String
Failed BIOS drive #1.
Note: On a server that is not using RAID, this message indicates the physical hard
disk drive that failed. In a RAID configuration, this message indicates the
logical disk that failed rather than a specific hard disk drive. You will need to
use your knowledge of the RAID arrays on the server to determine which
hard disk drive or drives failed.
Action:
1. Replace the hard disk drive or drives.
2. If the problem persists, have the system serviced.
Failed BIOS drive #2.
Note: On a server that is not using RAID, this message indicates the physical hard
disk drive that failed. In a RAID configuration, this message indicates the
logical disk that failed rather than a specific hard disk drive. You will need to
use your knowledge of the RAID arrays on the server to determine which
hard disk drive or drives failed.
Action:
1. Replace the hard disk drive or drives.
2. If the problem persists, have the system serviced.
Failed BIOS drive #3.
Note: On a server that is not using RAID, this message indicates the physical hard
disk drive that failed. In a RAID configuration, this message indicates the
logical disk that failed rather than a specific hard disk drive. You will need to
use your knowledge of the RAID arrays on the server to determine which
hard disk drive or drives failed.
Action:
1. Replace the hard disk drive or drives.
2. If the problem persists, have the system serviced.
Failed BIOS drive #4.
Note: On a server that is not using RAID, this message indicates the physical hard
disk drive that failed. In a RAID configuration, this message indicates the
logical disk that failed rather than a specific hard disk drive. You will need to
use your knowledge of the RAID arrays on the server to determine which
hard disk drive or drives failed.
Action:
1. Replace the hard disk drive or drives.
2. If the problem persists, have the system serviced.
Failed BIOS drive #5.
Note: On a server that is not using RAID, this message indicates the physical hard
disk drive that failed. In a RAID configuration, this message indicates the
logical disk that failed rather than a specific hard disk drive. You will need to
use your knowledge of the RAID arrays on the server to determine which
hard disk drive or drives failed.
Action:
1. Replace the hard disk drive or drives.
2. If the problem persists, have the system serviced.
130 Netfinity 5000 Server Hardware Information and Procedures