Diagnostic messages – IBM 5000 User Manual
Page 142
Advertising
Diagnostic Messages
Result
Test Specific String
Failed
Test setup error: Unknown hardware problem associated with microprocessor in
socket number U21.
Action:
1. Update the BIOS. See the “Getting Help Information” section of this
Server
Library for information about obtaining updates.
2. If the problem persists, replace the secondary microprocessor and run the
diagnostic program again.
If the problem persists, have the system serviced.
Failed
Test setup error: Cannot allocate memory due to unknown memory problem.
Action: Have the system serviced.
134
Netfinity 5000 Server Hardware Information and Procedures
Advertising