IBM 5000 - Manual (Page 87)

Completing the Installation
2. Replace the bezel, if it was removed.
a. Place the bezel tabs 1 in the slots at the bottom front of the server.
b. Press the top of the bezel toward the server front until the bezel clicks into
place.
3. Replace the server door, if it was removed.
a. Set the door on the bottom hinge.
b. Press the flange downward while pressing the top of the door toward the
server, until the flange connects with the top hinge. Release the flange.
4. Close and lock the server door.
Chapter 4. Installing Options 77