IBM CICS Transaction Server for OS/390 SC33-1686-02 - Manual (Page 262)

CMSG—message switching
OPCLASS NOT 1-24 AT xxxxx
An OPCLASS parameter must be in the range 1–24.
OPERATORS NOT SIGNDON nnn
The ROUTE option specified operator identifications
without terminal identifiers (that is, ROUTE=/opid). nnn
operator identifications are not currently signed on.
The valid reply to this is to enter one of the following:
1. A space as the first character, which deletes the
nnn destinations.
2. The character D (or any other character) which
causes each of the nnn destinations to be
individually displayed through the message OPRTR
ID NOT SIGNDON.
3. Any option that causes a return to normal option
processing mode. If no further ROUTE options are
entered, this same condition exists if an operator
does not sign on before the SEND option is
reentered.
Note: This message is only issued if nnn is greater
than 5; otherwise, each destination is individually
displayed. Reply 1 causes the message to be
routed if the resulting destinations are valid;
otherwise, another error message is issued.
OPRTR ID NOT SIGNDON /xxx
An operator with identifier xxx, specified as a destination
(entered either by the terminal operator or included as
an entry in a TLT whose suffix was specified), is not
currently signed on to any terminal controlled by CICS.
The valid reply to this is to enter one of the following:
A terminal identifier, or operator identifier, or both in
the same format as a normal termid/opid ROUTE
destination (without entering the option ROUTE or
R), which replaces this /xxx destination.
A space as the first character, which causes the
/xxx destination to be deleted.
Any option that causes a return to normal option
processing mode. If no further ROUTE options are
entered, this same condition exists if an operator
with identifier xxx does not sign on by the time the
SEND option is reentered.
Note: The first two replies cause the message to be
routed if the resulting destinations are valid,
otherwise, another error message is issued.
PROTECT OPND NOT 1-2 CHAR
The PREFIX option of the PROTECT option must not
specify more than 2 characters.
ROUTE INVALID AT xxxxx
A field separator entered before the first ROUTE
parameter, or 2 consecutive field separators were found.
Reenter a valid ROUTE option.
SPACE MUST FOLLOW TRANSID
One or more spaces must follow the transaction
identifier before the first option can start. (The character
C causes a continuation from the last input preceding a
normal completion or a cancelation.)
TERMID GT 4 CHAR AT xxxxx
A terminal identifier must be 1–4 characters.
TERMID NOT + / − at xxxxx
All TLT suffixes must be specified before any individual
destination (which must be preceded by a
+ or − ) may
be entered. A ROUTE option that specifies a TLT suffix
may not be continued on a succeeding input. If a
ROUTE option includes more than one parameter, it
must be enclosed in parentheses.
TERMINATED BY OPERATOR
The operator entered CANCEL as the last 6 characters
of the previous input, or pressed the CLEAR key twice in
succession on an IBM 3275 (or 3277) display station.
The previous input is canceled and the terminal is not in
conversational mode with CICS message switching.
TIME ALREADY PASSED
A delivery time for the current day, more than one hour
before the current time is considered already passed
and is invalid.
If the message is for immediate delivery, enter T= + 0, to
replace the TIME option that is still in effect.
If the message is for delivery at the specified time on a
future day, enter the appropriate DATE option. The
specified time is still in effect.
If the message is for delivery at a different time, reenter
the TIME option.
TIME INVALID AT xxxxx
TIME must be one of the following:
hhmm 0001–2400 (mm
<
60)
+ hhmm 0000–2400 (mm < 60)
+ mm 00–99
+
m 0–9
where hh=hours and mm=minutes.
TIME NOT 4 CHARS AT xxxxx
A TIME parameter must be a 4-digit number if it is not
preceded by
+ .
TOO MANY TBL SFX AT xxxxx
A maximum of 10 TLT suffixes may be specified.
UNBALANCD PARENS AT xxxxx
A ROUTE or OPCLASS option started with a
parenthesis but did not have one at the end, or ended
with a parenthesis but did not have one at the beginning.
xxxxx represents the characters near the relevant end of
the option.
244 CICS Supplied Transactions