ICP DAS USA IM-100 User Manual

Page 106

Advertising
background image

l of amplification of a signal. The Gain

affects image sharpness sensed by the naked eye.

ificant

sist of picture elements dubbed "pixels".

ons. The pixel size is a technical parameter

en die

scanning whereby lines of a picture are

computer world. This method is often used in

VD video encoding where the video is produced by scanning the film. It is also used in

sor Size” is the

imensions of CCD/CMOS sensor area, which is

l

Gain is the leve

When gain is increased in an image, one mus

take into consideration the addition of sign

“noise”.

Pixel Size - Most CCD and CMOS imagers con

Each pixel is one sensor within the array and ha

definite size, which should be available by the

cturer. Sizes typically range from 8-20

t also

s a

manufa

micr

that relates to resolution, process f

dimensions and pixel architecture. For a giv

size, a high resolution requires a small pixel

Progressive-Scan - A system of video

transmitted consecutively, such as in the

eature

D

enhanced and high

definition television systems

as it is supposed to produce

less visual artifacts than the

interlaced mode but

requires a higher refreshing

rate.

Sensor Size - The “Sen

d

responsible for transforming light into electrica

signals. Typically, the sensor size from 1/4” to 1

and measured by diagonal size.

- 106 -

Advertising
This manual is related to the following products: