ICP DAS USA IM-100 - Manual (Page 26)

(5) Once perfectly aligned with an empty slot, press the card firmly but
(6)
(7) Using 1394 cable to connect MAVIS IM-30/IM-100 1394 camera to
acquisition test please refer to the “EZView Utility”.
carefully in to the connector.
Anchor the board by replacing the screw.
1394 card and GPIO cable wiring if necessary. For image
(8) Turn on the system and you will be able to find the 1394 Host
controller device with Device Manager.
g distance, please
using 1394 repeater directly.
(9) If you need to extend your
workin
DO NOT input DC power to 1394 repeater when using
IPC/PC platform. The DC power input may damage your
1394 card or 1394 host controller circuit.
- 26 -