ICP DAS USA IM-100 - Manual (Page 91)

IMC_StrobeTimeBase_SetDurationTime
++ Builder 6.
short IMC_StrobeTimeBase_SetDuratio NDLE Camera_Handle, unsigned
IMC_StrobeTimeBase_SetDurationTime le As Long, ByVal Value
As Long) As Integer
C#.NET 2003
Mavis. IMC_StrobeTimeBase_SetDurationTime(IntPtr Camera_Handle, Int32 Value);
Description:
This function set the Duration Time of Strobe. This function is workable only for the
Output Ports that are configured to STROBE_SIGNAL. The camera needs be
initialized with IMC_Camera_Init().
Parameters:
Camera_Handle The handle for MAVIS camera. Use the handle gotten from the
‘pHandle’ parameter of IMC_Camera_Init().
Value The Duration Time of Strobe Control and allows value from 1
~85. By default, the Value is setting on 1.
Return:
ERROR_SUCCESSFUL Successfully
ERROR_CAMERA_CREATE The Camera_Handle is NULL.
ERROR_DEVICE_UNINIT The specific camera has not been
initialized.
ERROR_INVALID_CAMERA The handle is invalid.
ERROR_SOURCE_NOT_SUPPORT The source signal is not supported by that
specific output port.
Syntax:
Visual C++ 6.0 / Boland C 0:
nTime (HA
long Value);
Visual Basic 6.0
(ByVal Camera_Hand
- 91 -