ICP DAS USA IM-100 - Manual (Page 75)

6.6 Digital Input/Output
IMC_OutputPort_Status
Syn
oland C++ Builder 6.0:
s);
.0
tStatus As
ong) As Integer
s th
initialized with IMC_
arameters:
andle The handle for MAVIS camera, use the handle gotten from the
era_Init().
ll four Output Ports.
ignal
AT (0x00)
USER_SET_SIGNAL (0x03)
STROBE_SIGNAL (0x04)
Each byte of OutputStatus stands for independent configuration of every Output
Port.
For instance, 0x03030100 means that:
OutputPort#0 is configured to INTEGRATE_ENABLED_SIGNAL
OutputPort#1 is configured to TRIGGER_READY_SIGNAL
OutputPort#2 and OutputPort#3 are configured to USER_SET_SIGNAL
tax:
Visual C++ 6.0 / B
short IMC_OutputPort_Status ( HANDLE Camera_Handle, unsigned long*
pOutputStatu
Visual Basic 6
IMC_OutputPort_Status (ByVal Camera_Handle As Long, ByRef pOutpu
L
C#.NET 2003
Mavis.IMC_OutputPort_Status( IntPtr Camera_Handle, out ulong pOutputStatus );
Description:
This function get e hardware sources for all Output Ports. The camera needs be
Camera_Init().
P
Camera_H
‘pHandle’ parameter of IMC_Cam
pOutputStatus The pointer to Signal Source settings of a
The S Source configuration will be:
INTEGR E_ENABLED_SIGNAL
TRIGGER_READY_SIGNAL (0x01)
- 75 -