Intellinet Network Solutions 523615 - Manual (Page 17)

17
3. Select the “PPPoE User (ADSL)” radio button.
4. Key in the “User ID” and “Password” provided by your Internet service provider.
5. Click the “Apply” button. You will then see the following pop-up window:
If “Conn. State” shows “Successfully connected,” the configuration is correct.
6. Click “Show Internet connection status” and proceed to section 4.5.1.
If “Conn. Status” shows “Invalid ID/password.” the configuration is incorrect. Click
the “Close” button and check your ID and password.