Intellinet Network Solutions 523615 - Manual (Page 37)

37
4.7.4 Access List
Click “System” ➝ “Access List.”
Access List
With this function you can limit access to the router based on the IP address of the
computer. IMPORTANT: When you click "Start" to activate the service, you will see:
It is important to click "OK" here to make sure your computer still has access to the
router. Otherwise, you lose connectivity to the router and a hardware reset may
need to be performed in order to re-gain access. The option “Do you allow any
connection from INTERNET?” can be activated if the Remote Management function
is activated. It controls whether or not the client IP address is allowed to access the
router’s Web-based administration menu.
4.7.5 Miscellaneous Configurations
Click “System” ➝ “Misc.”