Intellinet Network Solutions 523615 - Manual (Page 7)

7
directly to Section 4. If you are unable to open the router’s Web Admin screen,
follow whichever instructions below apply to the operating system you use.
3.1 Windows 2000 Setup
1. Install the High-Speed Broadband Router.
2. Start Windows 2000 and check whether the LAN LED is on or off. If off, confirm
the connection between the computer and the router is correct.
3. Click “Start” ➝ “Setting” ➝ “Control Panel.”
4. Double-click “Network and Dial-up Connection” in “Control Panel.”