Intellinet Network Solutions 523615 - Manual (Page 33)

33
Login Account Setup: Enter your old ID and password and the new values. Click
“Apply” to save the changes. The default Login ID is “root”; the default password is
blank (no password).
Admin E-Mail Setup: If you want to receive router’s the system log via e-mail,
configure e-mail address, SMTP server and authentication information here. Click
“Apply” to save the changes.
NOTE: It is strongly recommended that you change the administrator
username and password during the initial setup. Failing to do so will allow
any user to access the router’s administrator menu and change the configuration.
NOTE: If want to restore the factory default values, turn off the router, press the Reset
button on the the device, and turn on the router while keeping the Reset button pressed.
About 5 seconds later, the RUN LED will flash rapidly and you can then release the
button. Once the startup sequence is complete, all configuration data will be restored to
the default configuration.