Intellinet Network Solutions 523615 - Manual (Page 48)

48
Internal Port Range: 17997–18003
Click “Add.” Repeat the same steps, but this time with UDP (as Silent Hunter
requires both TCP and UDP). After completion, you should have two new rules:
NOTES: Save the router configuration after completion; otherwise, the
configuration will be lost after the router is restarted. Also, the use of a static
lease IP for the client PC is recommended (Basic Setup ➝ LAN/DHCP).
4.9.4 Port Trigger
Click “NAT” ➝ ”Port Trigger.”
Some applications require a special port trigger setup. Simple port forwarding does
not work.
Port Trigger Setup Method: Key in the rule name, define the protocol and range of
the trigger port, then set up the protocol and range of the forward port. Click “Add”
to add the rule.
Rule Name: The description of adding the trigger port.
Port Trigger: Set up the trigger port.