Intermec CN2G - Manual (Page 16)

Chapter 1 — Using the CN2G Handheld Computer
4 CN2G Handheld Computer User’s Manual
Removing the main battery when the backup battery low or
critically low icon appears on the status bar may cause your
CN2G to cold boot and you may lose data.
If you fail to replace the battery immediately, you may lose
important data or applications.
Dispose of used battery packs promptly. Keep away from
children. Contact your local Intermec sales representative for
replacement batteries.
Several factors determine the life of your battery such as extreme
temperatures and your usage.
Installing and Charging the Battery
Make sure you fully charge the battery before you use your
CN2G. To charge the battery, you need to install it in the
CN2G.
To install and charge the battery
1 Push down on the battery door latch, and pull up on the
battery door.
2 Remove the battery door and set it aside.
Battery
door
latch
3 Align the battery contacts, and insert the battery in the
battery compartment. Press down on the battery until it clicks
into place.