Intermec CN2G - Manual (Page 70)

Chapter 3 — Developing and Installing Applications
58 CN2G Handheld Computer User’s Manual
Installing Applications Using Your SD Card
Using your SD card is the best method for you to install
applications.
To install applications using the SD card
1 If you are using an SD card reader, remove the SD card from
the CN2G and place it in the reader. For help, see “Using the
SD Card” on page 17.
2 Copy your application file to the SD card.
If you are using ActiveSync or Wavelink Avalanche to copy
the files to the SD card, place the application in the SDMMC
Disk folder located in My Computer.
3 If you are using an SD card reader, insert the SD card back
into the CN2G.
4 Navigate to the SDMMC Disk folder and run your
application.
After your application is installed, you can run it from the
Program files folder from My Computer.
Installing Applications Using Wavelink Avalanche
You can use the Wavelink Avalanche device management system
to install applications on all of your wireless CN2Gs. The
CN2G ships with the Avalanche Enabler already loaded on it.
Each time the Avalanche Enabler is activated (typically on a
warm boot), the CN2G attempts to connect to the Avalanche
Agent. When the CN2G connects to the agent, the Agent
determines whether an update is available and immediately starts
the software upgrade, file transfer, or configuration update.
To use Avalanche to remotely manage the CN2G
1 Install software packages and updates for the CN2G using the
Avalanche Administrative Console.
2 Schedule the CN2G updates or manually initiate an update
using the Avalanche Administrative Console.