Intermec CN2G - Manual (Page 23)

Chapter 1 — Using the CN2G Handheld Computer
CN2G Handheld Computer User’s Manual 11
To enable or disable symbologies
1 From the ScanDemo window, tap the Symbologies button
to see the symbologies that are enabled.
2 Select or clear the symbologies you want to use and tap Back.
3 If you want to configure symbology parameters, tap Intermec
Settings. Intermec Settings appears on your screen.
4 From the Intermec Settings application, go to Scanners,
Symbologies > Internal Scanner > Symbologies.
5 Select a symbology and modify its parameters.
6 Save your settings and close Intermec Settings. The Scanner
Symbologies window appears.