Intermec CN2G User Manual
Page 55
Chapter 2 — Configuring the CN2G
CN2G Handheld Computer User’s Manual
43
Configuring 802.1x Security With Microsoft Security
1
Make sure you have configured the communications and
radio parameters on your CN2G.
2
If you plan to use TLS for authentication, load a user and
root certificate on your CN2G. For help, see “Loading
Certificates” on page 47.
3
Open Intermec Settings.
4
Choose Communications > 802.11 Radio > Security
Settings > Microsoft Security.
5
For Infrastructure Mode, choose Infrastructure.
6
For Network Authentication, choose Open.
7
For Data Encryption, choose WEP.
8
For 802.1X Authentication, choose TLS or PEAP, and tap
Save.
If you choose TLS:
a
Select Properties and tap the Run App button. The
Authentication Settings box appears.
b
From the Authentication Settings box, tap the Select
button.
c
Select your certificate from the list and tap Save.
If you choose PEAP:
a
Select Properties and tap the Run App button. The
Authentication Settings box appears.
b
Select the Validate Server check box.