Intermec CN2G - Manual (Page 20)

Chapter 1 — Using the CN2G Handheld Computer
8 CN2G Handheld Computer User’s Manual
Using the Keypad
The CN2G has a 10-key keypad. You enter all of the characters
and functions printed on the keys just like you would on a
standard keyboard.
Shift key
Enter key
Arrow
keys (4) Power
key
Scan button
ENTER
ESC
CN2G Keypad
The Shift ( B ) key lets you access the additional functions
printed on the keypad overlay.
To access functions printed on the keypad overlay
1 Press and release the Shift key. The B icon turns on and
Shift mode is enabled.
2 Press and release the second key to access the function printed
above a key. For example, press the F1 key to access the F3
function. The B icon turns off.
If you do not press another key within 3 seconds of pressing
the Shift key, the B icon turns off and Shift mode is
disabled.
Using the Power Key
When you press the Power key to turn off the CN2G, you
actually put the CN2G in Suspend mode. In Suspend mode, the
CN2G continues to supply power to all memory, but turns off
power to most hardware. This power-saving feature is designed
to prolong battery life.
When you press the Power key to turn the CN2G back on, your
computer resumes where it was when you turned it off. If you
are using WPA or 802.1x security, the computer may need to
reauthenticate before it starts your application.