IBM AA-RWF3A-TE - Manual (Page 24)

4/64 SAN Switch models
The HP StorageWorks 4/64 SAN Switch models include:
• HP StorageWorks 4/64 SAN Switch Base ships with 32 ports activated and
includes Zoning and Advanced Web Tools as standard software components.
• HP StorageWorks 4/64 SAN Switch Full ships with 64 ports activated and
includes Zoning and Advanced Web Tools as standard software components.
• HP StorageWorks 4/64 SAN Switch Power Pack ships with 32 ports activated
and includes a Full Fabric license, Advanced Web Tools, and Zoning as standard
software components. It also includes integrated licenses for all optional
management tools (including Advanced Performance Monitoring, ISL Trunking,
Extended Fabric and Fabric Watch).
NOTE:
To add ports, see Activating additional 4/64 SAN Switch ports on page 28.
4/64 SAN Switch features
The HP StorageWorks 4/64 SAN Switch provides the following features:
• Air-cooled 2U chassis.
• 64 autosensing 1, 2, or 4-Gb/s Fibre Channel ports with the following
characteristics:
• Automatic negotiation to the highest common speed of all devices connected
to the port
• Port interfaces compatible with SFP transceivers, both SWL and LWL
• Universal and self-configuring ports capable of becoming an F_Port (fabric
enabled), FL_Port (fabric loop enabled), or E_Port (expansion port)
• Three redundant, hot-pluggable fan FRUs.
• Two redundant, hot-pluggable, universal AC power supplies. The unit can run on
one power supply, but HP recommends using both for redundancy.
• Two AC power supply cables
• One RS-232 serial port, designed to connect to a DTE port.
• One 10/100 Mb/s Ethernet port with an RJ-45 connector.
• Three internal temperature sensors.
24 Overview