iSymphony M110 - Manual (Page 14)

26 25
6. Press the PLAY/PAUSE button to begin programmed playback .
The “PRG” indicator remains on display.
The player will play all the tracks that you programmed in the
desired sequence. After the last programmed track has
played the player stops, but the programmed sequence
remains in the memory.
To play the programmed sequence again, press the PLAY/PAUSE button again.
To cancel the programmed sequence from the memory press the STOP/BAND button at
programming mode.
Programmed Repeat Playback
You can use the Programmed and Repeat Play back functions together to continuously repeat a
programmed sequence.
Program up to 64 tracks as described above.
Press the REPEAT button on the remote control twice.
Press the PLAY/PAUSE button to begin Programmed
Repeat Playback. The programmed sequence will be repeated
continuously.
PLAYING MP3 & WMA CDS
You may see the flashing “READ” indicator for a minute
or more before playback begins. This is normal
and not an indication of any problem with your player.
Most of the normal CD operations described in this manual also apply to MP3/WMA CDs. However
there are a few differences in MP3/WMA CD playback functions, and these are described on the
following pages.
MP3/WMA CD Reading Time and Display Information
After you load an MP3/WMA CD the player will read each of the directories or albums on the disc,
one at a time, and display the Directory Number and the cumulative number of tracks in the
directories that have already been read.
Because MP3/WMA CDs contain so much more information than normal CDs this CD player will take
longer to read the table of contents information on an MP3/WMA disc.
Press the PRESET/ALBUM/MENU + button repeatedly to
select album “03”. The track will show “48”
Press the SKIP/TUNING button five times the
display shows Track “53”.
MP3/WMA CD Playback
To skip quickly from a track in one directory to a track in another directory:
The PLAY/PAUSE, SKIP/TUNING , SKIP/TUNING and STOP/BAND controls have
the same functions for MP3/WMA CDs as they do for normal CDs.
Load an MP3/WMA CD into the player. Wait until the reading process is completed.
Example: Let’s assume that you want to skip to Directory # 03/Track # 005.
After reading the disc, the player will play automatically.