Basic playback, Loading discs, Place a disc, label side up, onto each bay – Integra DPC-8.5 User Manual

Page 29

Advertising
background image

29

Basic Playback

This section explains how to load discs.

Notes:

• You can load up to six discs. You don’t have to load all

six discs every time.

• When the disc tray is closed, all of the disc indicators

appear until the DPC-8.5 has checked each bay for the
presence of a disc. If a bay is found to have no disc, the
corresponding indicator disappears.

• To open the disc tray and turn on the DPC-8.5 at the

same time, press the Open/Close [

] button. (The

disc tray will take slightly longer to open.)

• The DPC-8.5 supports 8 cm and 12 cm discs. To avoid

damaging your discs or the DPC-8.5, always place
discs in the center of the disc bays.

• Only load discs that are supported by the DPC-8.5 (see

page 9). Don’t load cartridge-type discs.

• To avoid personal injury, keep your hands away from

the disc tray as it closes.

• Always use the Open/Close [

] button to open and

close the disc tray. Never push the disc tray, and don’t
touch it or obstruct it while it’s opening or closing.
Don’t press down on the disc tray while it’s open, and
don’t load anything other than supported discs. Doing
so may damage your discs or the DPC-8.5.

Loading Discs

1

Press the Open/Close [

]

button.

The disc tray opens and the six disc
number indicators appear on the
display.

2

Place a disc, label side up, onto
each bay.

3

Press the [Disc Skip] button to
access the other disc bays.

The disc tray turns counterclockwise
two bays at a time.

Standby/On

Standby

+10

Disc 1

Disc

2

Disc

3

Disc

4

Disc

5

Disc

6

Disc Skip Progressive

Dimmer

Step/Slow

Clear

1

2

3

6

4

5

Setup

Top Menu

Return

Audio

Stop

Down

FF

FR

Up

Play

Pause

Angle Subtitle

RC-

543DV

Open/
Close

On

Standby

Enter

7

8

9

0

Search

Last M Memory Chain Mode

Repeat

A-B

Random

Display

Menu

Play/Eenter

Open/Close

Open/Close

Play

Diec Skip

Disc1–6

Disc Skip

Disc Select

VCD

CD

MP3

JPEG

DVD-V

DVD-A

SACD

DVD-VR

Open/
Close

Remote controller

Disc Skip

Remote controller

4

When you’ve finished, press the
Open/Close [

] button again.

The disc tray closes.

See page 30 for information on select-
ing and playing discs.

Tip:

If you press the Play [

] button,

the disc tray will close and playback of
the disc in the right bay will start auto-
matically. If there is no disc in that bay,
the DPC-8.5 will check the other bays
and play the first disc it finds.

Tip:

If you press one of the Disc Select

1–6 buttons, the disc tray will close and
playback of the selected disc will start
automatically.

Open/
Close

Remote controller

Advertising