Configuring the dpc-8.5 —continued – Integra DPC-8.5 User Manual

Page 64

Advertising
background image

64

Configuring the DPC-8.5

—Continued

Notes:

• When entering the security code, you can use the

[Clear] button to delete numbers.

• This setting can be changed only when playback is

stopped.

• Once this setting has been turned on and a security

code set, if you want to turn off parental lock, or
change the parental lock level, you’ll be prompted to
enter the security code.

• Not all discs use parental lock. See the disc’s sleeve

notes for details.

• Discs with parental lock may cut certain scenes,

replace certain scenes with children-friendly scenes,
or prevent playback of the entire disc.

• If you forget the security code, instead of entering the

numbers, press the Stop [ ] button four times.

• When using a disc that supports parental control,

depending on the DPC-8.5’s operating status, some-
times you may not be able to remove the disc simply
by pressing the [Open/Close] button. In this case,
close the disc tray, use the [Disc Skip] button to select
another disc bay, open the tray again, and then remove
the disc.

Title/Group Stop

With this setting you can determine whether or not play-
back stops when the title or group that’s currently play-
ing ends.

Off (default)

Playback continues when the title or group ends.

On

Playback stops when the title or group ends.

PBC

This setting is used to enable or disable PBC (Playback
Control) for VCDs.

Off

PBC disabled.

On (default)

PBC enabled.

Notes:

• PBC functionality depends on the disc. See the disc’s

sleeve notes for details.

• Some VCDs may not use all of the PBC functions sup-

ported by the DPC-8.5.

Priority Contents

This setting determines what’s played when a
DVD-Audio disc also contains DVD-Video material.

DVD-AUDIO (default)

The DVD-Audio material is played.

DVD-VIDEO

The DVD-Video material is played.

Auto power off

The Auto power off function automatically turns off the
DPC-8.5 after 20 minutes of inactivity.

Off (default)

Auto power off function off.

On

Auto power off function on.

3

Use the Up and Down [ ]/[ ] but-
tons to specify the parental lock
level from 1 through 8, and then
press [Enter].

The parental lock is now set.

The parental lock levels conform to
U.S. movie ratings as follows:

• Level 7: NC-17
• Level 6: R
• Level 4: PG13
• Level 3: PG
• Level 1: G

4

When you’ve finished, press the
[Setup] button.

The settings are stored.

Enter

Remote controller

Setup

Remote controller

DVD-V

DVD-A

VCD

DVD-A

Advertising