Basic operation, Basic operation 0, Figure 1c am/pm setting – Interquartz IQ750 User Manual
Page 10: Figure 1d time setting
10
FIGURE 1C AM/PM SETTING
7.
If 12-hour mode was selected above, the display will show “1-AM 2-PM”
8.
Press 1 or 2 to select AM or PM time display
FIGURE 1D TIME SETTING
9.
The display will show “TIME-HHMM” after completion of the Hour Mode Setting
10. To set the current time enter 2 digits for the hour, followed by two digits for the
minutes
11. The display will show “CLOCK STORED” and the date and time will be updated.
Note: use Cursor
or
to correct your numeric entries stage in the above procedure.
BASIC OPERATION
IQ750 can be used in the same way as a normal telephone; simply lift the Handset to
answer an incoming call, or lift the Handset and dial on the Keypad to commence an
outgoing call. Please refer to other sections for more about Handsfree, Headset, Caller ID
display and Memory operations. The telephone will also operate in a basic mode when
mains power has failed and if batteries have not been fitted (the telephone will
automatically power up approximately 1 second after lifting handset). If 4 x AA alkaline
batteries (not supplied) are fitted in the absence of mains adaptor or during mains power
failure, they can provide up to one month's support of all functions.
NEW
REPEAT
CALL#
TIMER
AM
PM
NEW
REPEAT
CALL#
TIMER
AM
PM